Very Large High Volume Production Machines
 |
The largest machine in the standard Durapul line, the 5010 has the power to accomodate structural profiles, flat sheet or multiple cavity hollow parts. |
View some of the features that make Durapul the most sought after name in pultrusion:
Learn more about our comprehensive approach to pultrusion here.
| Specification | 5010 | |||
| Product Envelope, w x h | 50 x 10 in / 1,270 x 256 mm | |||
| Pull Capacity | 40,000 lbs / 18,000 kg | |||
| Gripper Length | 24 in / 450 mm | |||
| Mold Stand Capacity | 6000 lbs / 2725 kg | |||
| Speed Range | 72 ipm / 1.8 M/min | |||
| Heating System | ||||
| Number of Zones | 10 | |||
| Heater receptacles/zones | (2) | |||
| Watts/Zone | 6000 | |||
| Controls/Interface | PLC / Touchscreen | |||
| Saw Blade Diameter | ||||
| Voltage * | 480 / 3ph / 60Hz | |||
| Amperage | 200 | |||
| Air Requirement | 5 cfm @ 80 psi | |||
| Machine Length | 35 ft / 10.7 M | |||
| Maximum Machine Width | 72 in / 1.68 M | |||
| Average Machine Width | 66 in / 1.68 M | |||
| Process Centerline | 41 in / 1.04 M | |||
| Machine Weight | 15,000 lbs / 6800 kg | |||
COMPARE ALL DURAPUL MODELS